This is a PDF pattern for an antique tractor sculpture. It is worked in Aunt Lydia’s size 10 crochet thread in the colors Myrtle Green, Golden Yellow, Black and Silver with a size 7/1.65mm steel crochet hook. The pieces are worked and assembled and stiffened over ordinary household objects or Styrofoam pieces. They are hot glued and fabric glue...

This is a pattern for a filet crochet table runner. The finished size is approximately 43” x 14 1/2” with a size 7/1.65mm steel hook. Most of 3 balls of Aunt Lydia’s size 10 Frosty Green @ 350 yds per ball were used for this project. The project uses basic filet crochet stitches and is mostly worked following a graph. The first few rows are wri...

This is a pattern for a wall hanging that is crocheted stiffened balls glued together to form two canes that are crossed in the middle and tied with a crochet bow. The stiffened balls are hot glued to each other and a piece of plastic canvas mesh is glued to the back and then trimmed away for added stability.

This is a pattern for a doily with flowers around the outside edge joined on the go. It can be worked in any number of colors. It is made of size 10 thread and a size 7/1.65mm steel crochet hook. The finished size is about 12”.

This is an easy to make doily using flower motifs and chain stitches. There are written instructions and also a large photo to help show the placement of the chain stitches. The pattern calls for size 10 crochet thread and a size 7/1.65mm steel crochet hook. The doily is about 13”.

This is a pattern for a crocheted doily. The finished size is about 12 1/2”. It can be worked in two or more colors or just a single color if desired. It works up quickly using size 10 thread and a size 7/1.65mm crochet hook. If two colors are desired you need two balls of thread but if only one color is used one ball is plenty.

This is a little filet crochet covered pillow . Two identical pieces of filet are worked then a little pillow is sewn and inserted in between the crochet pieces. There is a 1/8” ribbon woven between the spaces to hold the pillow together and the ends are tied in a bow at the top corner. This would make a great little ring bearer pillow as well ...

This is a pattern for a lighted snowman ornament. The ornament pieces are crocheted in halves and stiffened around Styrofoam balls. The halves when dry and removed from the forms are glued together with permanent fabric glue and the pieces hot glued together. The hat is stiffened over a drink bottle cap. The patterns have instructions for the b...

This is a pattern for a wreath consisting of balls that are hot glued onto a 12” wire wreath form. The balls are crocheted in halves and stiffened over 2 1/2” foam balls. A bow crocheted with yarn is added at the top or the bottom as desired. Also a thin wire battery light string can be run thru the balls to light up the wreath making for some ...

This is a pattern for a Candy Cane, Wreath and Tree crochet ornaments using the same crochet technique and pattern. All are made from 1” crocheted stiffened balls that are hot glued together using size 10 crochet thread and a size 7/1.65 mm steel crochet hook. The same pattern is used for each just the colors and the shape they are glued into i...

These earrings are made up of a motif with a color single crochet border and complimenting buttons on french wire earrings. The measure 1 1/2” and the buttons are 5/8” Very quick and easy to make in a variety of colors and decorative buttons

This is a pattern for the crochet eggs only. They are worked in halves and stretched over a 2 5/16” x 3 1/16” foam egg so they meet in the middle. After they are stiffened they are glued together with fabric glue and a piece of ribbon is glued around the join. 10 of them fit on a 12” box wreath frame. This is a pattern only for the eggs and how...

This bracelet is made up of square, triangle and hexagon shapes joined with chain stitches. There is a shank button in the center of the hexagon and also one to close the bracelet with a chain loop so it looks good from any direction. The bracelet is 9” long and 2” wide. The hexagon is 2” , the square and triangle are 1 1/2”

This is a pattern for a crochet doily using motifs and lattice weaving. It is pretty easy to make using basic crochet stitches and also front post trebles for added texture. Some of the photos show the reverse side for stitch placement of the weavers

This is a pattern for a doily that is worked in motifs and with lattice weaving and also a scallop edging. It is pretty quick and easy to make using basic crochet stitches and also front post treble crochets. One picture shows the reverse side for stitch placement of the weavers

This is an easy to make pattern for a very versatile shawl. It is worked in basic crochet stitches with front and back post trebles for added texture. It can be worn in any number of ways even as a wrap for a swim suit cover.

This is a doily that is worked in motifs and also has lattice weaving with a scallop border. It also has front post treble stitches for added texture. It works up pretty quickly using basic crochet stitches.

This is a unique pattern in the fact that it is really two patterns in one design!! It is for a poncho that is two pieces that button together in any number of ways to be able to wear it different ways or unbutton the pieces and use them separately as a shawl. The rows are worked in strips that are joined on the go. It works up rather quickly a...

This is a pattern for sculptured Indian Corn. The pieces are crocheted then stiffened. They are pretty easy to make. Three of them are used to make the door decoration then tied together with a crocheted bow. The corn itself is about 7 1/2” tall and 2” wide tapering to about 1” at the bottom. The husk is 3/4” wide x 7” long. The husk has some s...

This is a pattern for a filet crochet table runner. The first few rows have written instructions then the rest is worked following the chart. There are written instructions for the easy border around the outside edge. There is a new stitch in this pattern I call a reverse lacet stitch. The instructions are included for it. This makes an even la...

This is a pattern pack of designs for fall decorating. There is a leaf doily pattern, 2” pumpkin pattern with faces optional, 4” pumpkin, a ghost and candy corn. It would make a great centerpiece for a fall table. The Leaf measures 7” wide by 6” tall, 7 1/2” including the stem. The Candy Corn and Ghost are about 6” tall and 3” wide across the b...

This is a pattern for a 3D Christmas tree. The 3 pieces of the tree are worked and stiffened flat then when dry two of the sections are cut down from the top and one up from the bottom. They are then slid into each other and spaced evenly and glued in the middle. Crocheted ornaments are glued on and a thin battery light string is woven thru the...

This is a pattern for a lighted snowman sculpture. The finished size is 8 3/4” tall x 4” diameter at the base. It is worked in size 10 crochet threads, 1 ball each, with a size 7/1.65mm steel crochet hook. The pieces are worked and stiffened over styrofoam balls and household items. A battery light string can be inserted thru the back to light ...

This is a pattern for a Turkey sculpture. It is 5 3/4” tall x 7” wide. It is made from Aunt Lydia’s size 10 crochet threads and is formed by stiffening the pieces over styrofoam balls and other household objects then assembled. It is made using basic crochet stitches

This is a pattern for a Snowman Candy Dish sculpture. The finished size is 6” across the bottom with the hat making it about 8” wide across the brim. It is about 5 1/2” tall. The head pieces are worked in halves and dipped in stiffener then stretched over a 6” styrofoam ball to dry. It is a pretty easy pattern to make using basic crochet stitch...

This is a pattern for a crocheted Pumpkin Candy Dish. It is worked in size 10 crochet threads with a size 7/1.65mm steel crochet hook. The pumpkin part is worked in halves then stiffened over a 6” styrofoam ball. After they halves are dry they are glued together around the center. The hat is crocheted and stiffened over a cardboard ring to fit ...

This is a pattern for a filet crochet towel edging. The first row of the edging is worked into the short end of the towel so it is joined as you go. The first few rows have instructions to get you going then the remainder is worked following a graph. It has an easy crocheted edging around the edges of the crochet work.

This is a pattern for a lighted Halloween/Fall sculpture featuring stacked pumpkins. The halves are crocheted then each is stiffened over a styrofoam ball. After the stiffener is dry the halves are glued together then the stack is glued together and the features are glued on. A battery light string can be inserted up from the base to light the ...

This pattern is for a Snowman that the pieces are worked in halves then stiffened over styrofoam balls to shape. It also can have a thin wire battery light string brougth up from the bottom into the hat if desired. It is worked in size 10 crochet threads with a size 7/1.65mm steel crochet hook. A great decoration for all winter long!!

This pattern for a pillow is about 12 1/2” square. It has front post treble stitches for added texture and design. It is the same pattern on each side so it is reversible and has buttons in the middle to pull in the center a bit for added interest. It is worked in size 10 crochet threads, one ball for each color. Also it can be made as a doily.

This is a doily pattern that has join as you go motifs and lattice sections with scallop trim. It also has front post treble stitches for added texture. The pattern is pretty easy once you get the pattern going it repeats often.

This is a pattern for a doily with lattice sections in it. It also has front post treble stitches for added texture and a 3 layer scallop trim.

This is a pattern for a doily called Retro. It is made up of motifs with a lattice center between them. It also has front post treble stitches for added texture and scallop trim. The pattern is written instructions, not a chart.

This is a pattern called Pretty Pathways Doily. It is made up of motifs and lattice sections. This pattern won second place at the Crochet Guild of America design competition in 2014.

This is a pattern for a doily called Victorian Square. It is made up of join as you go motifs and lattice sections with scallop trim accents. It also has front post treble stitches for texture. The pattern is written instructions, not charts.

This is a pattern pack for a crocheted hat, scarf and fingerless mitts. They are all worked in the same basic pattern with a shell stitch. The pattern contains a lot of repeats and they are very easy and quick to make. Red Heart Super Saver yarn was used in the project with a size I-9 hook.

This is a pattern to make a stiffened crochet sculpture bunny and carrot. Both bunnies are the same pattern it’s all in the placement of the “arms”, legs and head if it’s a standing or laying down bunny. The pieces are crocheted in halves and stiffened over easy to find plastic or Styrofoam eggs. The halves are then glued together with permanen...

This pattern is for a crocheted doily/wall hanging/candy dish. It is stiffened with heavy fabric stiffener and has a crocheted hat band or a pretty ribbon could be used as well. The dished in top will hold candy or other small items and makes a pretty doily as well. It also works great as a wall/door hanging.

This pattern is for a stuff toy tractor. It is worked in basic crochet stitches and there are plenty of pictures included in the pattern to help with assembly and placement. Great for the little one in your life or the collector as well!!

This is a pattern for a stuffed tractor toy. It is worked in basic crochet stitches and has plenty of photos included to help with assembly and placement of parts. Great for the little one in your life or the big collector kid, too!!

This is a pattern for a filet crochet edging with a farm scene. The first few rows have written instructions then the rest follows the graph. The shell edging has written instructions as well.

This pattern is for a filet crochet edging which features tractors and a fence. The fabric center can be as wide as desired the length will match the crocheted edging after it is blocked. The pattern has written instructions to get started then is worked following a graph.

This is a pattern for a filet crochet runner edging featuring a tractor and grain cart, combine and tractor trailer with a hopper trailer perfect for that fall harvest table decoration. Each edging is crocheted and blocked then the center fabric section is cut to fit the length and the desired width as specified in the pattern.

This is a pattern for a filet crochet edging featuring a tractor, barn and fence. The filet edgings are worked then the fabric center is prepared and the edgings are sewn onto the center.

This doily is called This ‘n That because it has a little of this and a little of that to make up the finished piece. It has motifs, lattice work, scallops and front and back post stitches plus color changes and they all come together quite simply to make the finished doily

This is a pattern for a crocheted tractor sculpture. It is worked in pieces and stiffened over easy to find objects. There are many photos included in the pattern to help with the construction of this little tractor. An advanced beginner could easily make this design. It uses basic crochet techniques.

This is a pattern for a crocheted tractor that is stiffened over various easy to find items and then hot and fabric glued together. It is worked in basic crochet stitches and an advanced beginner could easily make this project. This project was made in size 10 crochet threads.

This pattern pack is for 5 shell accessories, a fringed scarf, keyhole scarf, headband/warmer, cowl and fingerless mitts. They are worked in strips that are joined on the go on an angle so each piece begins and ends on an angle. The fringed scarf is 4” wide x 53” without the fringe, keyhole scarf is 4” wide x 42 1/2”, headband and cowl are 4” x...

This is a pattern for a purse in the chevron design. It is worked in all double crochets. The finished size of the purse from the top of the handles to the bottom of the bag is 18” x 13 1/2” across the top of the bag, 10 1/2” across the bottom with a 2” gusset. The handles are 1 1/2” wide with a 9” drop. Thank you for checking out my design.

This pattern is for a plaid table runner. It is worked in size 30 threads, 3 different colors. Most of it is worked in double crochets except for the accent thread row which is worked in single crochet. It is worked in 2 balls size 30 DMC Cebelia in #699 Christmas Green, 2 balls size 30 DMC Cebelia in Ecru and 1 ball size 30 DMC Cebelia #847 Bu...

This pattern is for a purse worked holding 2 strands of nylon threads together. It has 2 easy cables worked down the sides. It is pretty quick to crochet the handles are crocheted as well. It has instructions for a simple sewn lining and a magnetic clasp.

This pattern is for a crocheted basket and eggs. The basket is 8 1/2” tall and 7” wide, the eggs are 2 1/8” x 1 7/8” and are shaped around a plastic Easter egg.

This design is made by stiffening the crocheted pieces over plastic Easter egg shapes. The shapes are crocheted in halves then stretched over the coordinating eggs. The body section has an opening crocheted in the belly side to slip in a plastic fruit cup container for candy or treats. The pieces are hot glued together and the features are fabr...

This is a pattern for a type of filet crochet photo frame that is worked in the round. It has written instructions as well as a graph to follow. The photo opening is 4 1/2” x 5 3/4” with an acrylic photo frame glued to the back. It has magnets glued on the back and also saw tooth hooks as well. It can be hung vertical or horizontal.

This is a pattern for a woven wall hanging. The strips are crocheted then woven then the edges of the strips are crocheted together with chain stitches. Then an edging is added. Ribbon can be woven thru the edging and a wired ribbon bow can be added. The project can be stiffened or left alone and used as a doily.

This is a pattern for a tree made from crocheted balls which are worked in halves, stiffened around a 1 1/2” foam ball, glued together then glued around a 9” Styrofoam cone form to shape them. Later the cone is removed and a battery light string can be inserted if desired.

This design consists of a solid background worked in double crochets with a filet piece on top of it. There are 2 sets of battery light strings in the photos. It has a pocket crocheted on the back to hold the battery packs. The filet piece is laid on the solid piece and the light string with the wire is woven thru the tree to hold them together...

This scarf is a filet crochet pattern and is worked following a graph. The first several rows have written instruction to get started then it is a simple repeat on the graph. It has written instructions for the simple border.

This doily is worked in rounds and is similar to a granny square. It has front post treble stitches worked in for added texture and design. It is worked in 5 different colors but would be beautiful in a solid color as well. It is made from Aunt Lydia’s size 10 crochet threads in Antique White, Copper Mist, Delft, Olive, and Aspen Multi, one 350...

This is a filet crochet table runner designed by me. It has instructions for the border in the same color as the center or with a different color to accent the edging that resembles tiny trees. The first few rows have written instructions to get started then the rest is followed on a graph. The border has written instructions.

This pattern is worked in size 30 crochet thread with a size 12/.75mm steel crochet hook. It is worked from written instructions. It has some features that are similar to a granny square and some similar to filet crochet.

This is a filet crochet table runner pattern that is worked from repeats on a graph. The first few rows are written out to get it started. The points are worked on each end after the runner is worked. It can be longer or shorter by changing the number of repeats.

This pattern is for a filet crochet table runner. The first few rows have written instructions then the rest is followed by repeats on a graph. It has written instructions for the border. Any questions please contact me and I’ll do what I can to help!!

This is a filet crochet piece that is worked using size 30 threads, two strands at a time, to create the primitive coloring in this runner. For the burgundy or navy/ecru sections a strand of each color is worked together until the stars. The stars are worked by dropping the ecru to the back then after the star, picking up the ecru and using two...

This is a pattern for a filet crochet table runner featuring bunnies. The first few rows have written instructions then the rest is following a graph. The simple border has written instructions as well. Very nice spring design.

This is an original filet crochet design by me. It has written instructions for the first few rows then follows a graph. The instructions for the border are written out as well. The finished size is 15” x 35 5/8”.

This is for a PDF file download only, not a finished product. It is an original design by me and is a fall harvest farm scene. It is a filet crochet piece that has written instructions for the first few lines then it is followed by a chart. The border has written instructions as well.

This is a pattern for a filet crochet shawl but it can also be used as a table runner. The first few rows of the pattern are written out to get started then followed by repeats on a graph. It has a border with written instructions. It works up rather quickly and is an easy pattern to follow.

This centerpiece is one of my original designs and is available for download in PDF format by email after payment is received. It is worked in Aunt Lydia’s size 10 crochet thread, 360 yds Burgundy, 330 yds New Ecru and 55 yds Navy. A size 5/1.9mm steel crochet hook was used to make this centerpiece. The motifs are joined as they are worked so a...