patterns >
CrochetPatternGuru
> 0067 Rabbit Bunny
0067 Rabbit Bunny
LANGUAGE
The pattern is in the ENGLISH language.
SKILL LEVEL: Experienced
FINISHED SIZE:
1 – small 21 cm tall (without ears) provided using the yarn and tools mentioned.
2 – big 33 cm tall (without ears) provided using the yarn and tools mentioned
Pay attention: the size of the toy depends on the yarn you use and your manner of crocheting.
SKILLS REQUIRED:
Crochet in rounds
Single crochet
Increasing
Decreasing
Slip stitch
Tinting (explained in the pattern)
MATERIALS AND TOOLS
You will need a rabbit 21 cm tall (small)
❖ yarn: Alize Angora REAL 40 (lace; 60% acrylic, 40% wool; 483 m per 100g ball) – cream (67). You will need 50 g.
❖ toy eyes, 5 mm in diameter
❖ black Iris yarn to do mouth sculpting.
❖ 1.3-mm crochet hook
❖ floral braided wire with 0.55-mm cross section. You will need 40 cm of wire to reinforce the ears.
❖ braided copper wire with 1.5-2 mm cross-section. You will need 80 cm of wire to make the frame for the arms and legs.
❖ cotter pins: 2.0 х 25 mm (2 pcs), 2.5 х 25 (3 pcs)
❖ discs: 30 mm (6 pcs) for the legs and head, 20 mm (4 pcs) for the arms
❖ a piece of cotton fabric to make the collar.
You will need a rabbit 33 cm tall (big)
❖ Yarn 1: Alize Angora REAL 40 (lace; 60% acrylic, 40% wool; 483 m per 100g ball) – cream (67). You will need 1,5 skeins (150 g).
❖ Yarn 2: Kidmohair - Kid Reggio Lagopolain (lace 2 ply; 60% Goat – Mohair, 30% Manufactured Fibers - Nylon / Polyamide, 10% Wool – Merino; 950 m per a 100g ball) – You will need 0,5 skeins (50 g).
Attention! 3 strands of yarn should be held together. 2 alize + 1 kidmohair.
❖ toy eyes, 10 mm in diameter
❖ 3-mm crochet hook
❖ discs: 6 pics - 45 mm. 4 for the legs and 2 for the head, 4 pcs - 35 mm for the arms.
❖ cotter pins: 5 pcs – 3,2 x 32
❖ braided copper wire with 3 mm cross-section. You will need 160 cm of wire to make the frame for the arms and legs. You can also use thinner wire. In this case, twist a few wires together for better strength.
❖ floral braided wire with 0.55-mm cross section. You will need 80 cm of wire to reinforce the ears. Twist two 40 cm pieces of wire together to make it stronger.
You will need for both sizes.
❖ tapestry needle
❖ wadding polyester
❖ black Iris yarn to do mouth sculpting.
❖ Velcro tape to brush the toy (I usually buy several meters of Velcro tape and then cut out a small piece of a suitable size to brush the toy)
❖ slicker brush
❖ hairbrush
❖ scissors
❖ artistic paints for tinting: PanPastel pastel colors (brown), Gallery MUNGYO dry pastel, STABILO gel ball pen (black), or any other tinting materials you can use to tint the toy.
❖ paintbrushes, soft toothbrush
❖ transparent glue
❖ glass granules, 3 - 4 mm in diameter
❖ fabric plaster or isolation tape
❖ a piece of cotton fabric to make the collar.
ABOUT THIS PATTERN
The pattern is written using USA terminology.
This pattern is easy to follow with step-by-step instructions (45 pages with detailed instructions, tips, and photos illustrating the process)
PRINT-FRIENDLY VERSION
A Print-friendly version is included too. This version does not include pictures to save ink if you need to print the pattern.
383 projects
stashed
180 times
- First published: May 2018
- Page created: May 9, 2024
- Last updated: May 9, 2024 …
- visits in the last 24 hours
- visitors right now