This is a pattern for a pair of long & short muffatees and matching beanie & tammy worked in the round using the stranded colourwork technique. Both hat requirements and abbreviations are on Page 6, with the beanie instructions begin on Page 7 and tammy instructions begin on Page 8.
Familiarity with working pieces inside-out and/or good tension control is helpful with this project since there are vertical stripes.

Included with the muffatees are instructions for a folded hem as seen in sample. The size is determined by needles sizes. You will probably need 4 sizes of needles:

1. needles for desired hand size
2. needles 3 or 4 sizes larger than desired hand size
3. & 4. needles used to shape forearm in between needle sizes 1 & 2 If you need any extra room you may be able to go up to size 3.5mm needles with fingering weight yarn.

MUFFATEES
yarn:
Shetland 4ply by Gathered Sheep Yarns; Fingering; 100% Pure Shetland Wool; 233yds (213m) / 55g
OR
BFL/Masham 75/25 by Gathered Sheep Yarns; Fingering; 75% Bluefaced Leicester, 25% Masham; 437yds (400m) / 100g
OR
Hawkcombe Wood by Gathered Sheep Yarns; Fingering; 100% Wool;
424yds (388m) / 100g
approximate yarn amounts (muffatees):
colour A - long muffatees 182yds/167m; short muffatees 146yds/134m
colour B - long muffatees 182yds/167m; short muffatees 146yds/134m
needles:
2.0mm (us no 0) DPNs 6in/15cm; set of 5
2.25mm (us no 1) DPNs 6in/15cm; set of 5
2.5mm (us no 1.5) circular (beanie); DPNs 6in/15cm; set of 5
2.75mm (us no 2) circular (tammy); DPNs 6in/15cm; set of 5
3.0mm (us no 2.5) circular (beanie);DPNs 6in/15cm; set of 5
3.25mm (us no 3) circular (tammy);DPNs 6in/15cm; set of 5
The size is determined by needles sizes and you may change needles
as you work to fit your forearm and hand.
gauge: Which is important with this project for a good result.
34 (32, 30, 28, 26) sts x 34 (32, 30, 28, 26) rows = 4in/10cm measured over stranded stockinette on 2.25 (2.5, 2.75, 3.0, 3.25) mm needles
Some knitters work stranded and single-coloured at different gauges. Change needles, as needed, to keep gauge the same throughout. Vertical lines in stranded knitting can be a challenge, please take care.
approximate finished size:
knuckle circumference - 7.5 (7.75, 8.5, 9, 9.75) in / 19 (20, 21.5, 23, 25) cm using sized 2.25 (2.5, 2.75, 3.0, 3.25) mm needles with the above gauge
forearm circmference - 6.75 (7.25, 7.75, 8.25, 9) in/ 17 (18.5, 19.5, 21, 23) cm using sized 2.25 (2.5, 2.75, 3.0, 3.25) mm needles with the above gauge
additional tools:
needle to weave in ends, st marker, stitch holders, extra yarn for any added embroidery (optional)

HATS
yarn:
Shetland 4ply by Gathered Sheep Yarns; Fingering; 100% Pure Shetland Wool; 233yds (213m) / 55g
OR
BFL/Masham 75/25 by Gathered Sheep Yarns; Fingering; 75% Bluefaced Leicester, 25% Masham; 437yds (400m) / 100g
OR
Hawkcombe Wood by Gathered Sheep Yarns; Fingering; 100% Wool; 424yds (388m) / 100g
approximate yarn amounts (beanie/tammy):
colour A - 40g/50g
colour B - 30g/40g
needles:
2.5mm (us no 1.5) circular (beanie); DPNs 6in/15cm; set of 5
3.0mm (us no 2.5) circular (beanie);DPNs 6in/15cm; set of 5
2.75mm (us no 2) circular (tammy); DPNs 6in/15cm; set of 5
3.25mm (us no 3) circular (tammy);DPNs 6in/15cm; set of 5
gauge:
28 (26) sts x 28 (26) rows = 4in/10cm measured over stranded stockinette on 3.0 (3.25) mm needles
Some knitters work stranded and single-coloured at different gauges. Change needles, as needed, to keep gauge the same throughout.
approximate finished size:
one size fits many; 21 - 25 in/53 - 63.5 cm head circumference
additional tools:
needle to weave in ends, st marker