Yarn
(MC) Fingering weight yarn
Approximately 700 yards / 640 m
2 skeins of amirisu Swing (100% Superwash Merino Wool; 500 yards / 460 m, 100g)
Sample is shown in Mushroom

(CC) Sport weight yarn
Approximately 380 yards / 350 m
2 skeins of amirisu Flutter (65% Baby Suri, 17% Merino, 18% Silk; 191 yards / 175 m)
Sample is shown in Nougat

Needle
A US 10½ (6.5 mm) 32” / 80 cm (or longer) circular needle
A US 7 (4.5 mm) 32” / 80 cm (or longer) circular needle
A US 6 (4.0 mm) 32” / 80 cm (or longer) circular needle
Or, needle required to obtain gauge

Gauge (after blocking)
22 stitches & 33 rows = 4” / 10 cm in main pattern of Chart 2 with US 6 (4.0 mm) needle and MC

Size
Finished measurements:
Width 61” / 155 cm, depth 25½” / 65 cm

Tools
Stitch markers (3, or 15 if you prefer to place markers every pattern repeat), tapestry needle

Notes
The shawl is knitted from bottom up, casting on large number of stitches and working decreases at both side of each triangle. After stitches are cast on, work Chart 1 once in CC, Chart 2 twice in MC and lastly Chart 3 once in MC.
There are 3 Garter Stitches at both side of shawls and they are NOT INCLUDED in the charts. A stitch marker is placed in between 2 triangles. Please knit tighter for the stitches that are next to the Center Stitch Marker. The right and left triangle are worked the same. Please work the chart TWICE between the garter edge stitches. It is helpful to place markers every pattern repeat.

Yarn
(MC) Fingering weight yarn
約700 yards / 640 m
amirisu Swing (100% Superwash Merino Wool; 500 yards / 460 m, 100g), 2カセ
サンプル色はMushroom
(CC) Sport weight yarn
約380 yards / 350 m
amirisu Flutter (65% Baby Suri, 17% Merino, 18% Silk; 191 yards / 175 m), 2カセ
サンプル色はNougat

Needles
1 x US 10½ (6.5 mm), 80 cm (またはそれ以上の長さ)の輪針
1 x US 7 (4.5 mm), 80 cm (またはそれ以上の長さ)の輪針
1 x US 6 (4 mm), 80 cm (またはそれ以上の長さ)の輪針
または, ゲージが取れる太さの針

Gauge (ブロッキング後)
US 6 (4 mm)の針とMCを使用し,
チャート2の模様で22目 & 33段 = 10 cm

Sizes
出来上がり寸法
幅155 cm, 深さ65 cm

Tools
目数マーカー(3, もしくは15 (パターンの繰り返しごとにマーカーを入れる場合)), 綴じ針

Note
このショールは最初に作り目を多く作り, 各三角形の両端で減目しながらボトムアップで編む. 作り目をしたら, CCでチャート1を1回編み, MCでチャート2を2回, 最後にMCでチャート3を1回編む.
ショールの両端にガーター編み3目を編むが, チャートには含まれていないので注意する. 2つの三角形の間にマーカーを入れる. 中央の目数マーカーに隣り合う目はきつめに編むこと. 左右の三角形は同じものを編む. 両端のガーター編みの間でチャートを2回編むこと. 各チャートの繰り返しごと(または繰り返し数回ごと)にマーカーを入れるとわかりやすい.