X Y Harness

Supplies:
#10 thread approximately 400 yards
Size A hook (2.00 mm)
1 1.6” (exterior 2”) (40mm) steel ring
4 5/8 “ (15mm) steel rings
3 1” (25mm) steele rings
WELDED rings are strongly suggested

Gauge: 3”= 10st, 18 rows

Preface notes:
This pattern is written to fit s-5x
Small - Medium fits 25”-31”
Large - XL fits 32” -38”
2X - 3X fits 39” - 45”
4X - 5X fits 46” - 52”
Rows may need to be added or subtracted
from some of the strips to ensure a more
custom fit.

When you attach straps to the metal rings you will create a seam on one side, and the other side will lay flat. Try to keep the seams all on the same side of your garment, I have written instructions as best I can to ensure this. The side where the seams stick out will be referred to as the “seam” side. The side that lays flat without seams is referred to as the “front” side.

The bottom edge of the under boob straps will be referred to as the “bottom” of the garment. You’ll gradually add pieces from the under boob strap up, so the pieces above the Underboob strap will be referred to as the “top” of the garment at any given point.

Some instructions can be difficult to understand. For this reason, I have created a YouTube video for examples of the trickier instructions. Please refer to this link for video notes: https://youtu.be/d9Y0nsFa3KA