My widest & most ends weaving project yet.
It’s 10 epi. Only have a 6 & 12 dent Reed’s for Shira. So I went with 1-2-2 in the reed.
Saturday 1-19-2019
Wound the warp & got it onto the loom. First time with so many ends. Also 1st time winding 2 warps for a project. Probably took about an hour to wind the warp.
The black warp was longer on the loom. But not too much so.
Really thought I had counted threads multiple times. But think I am 2 threads short on the red. But I also had one loop that seems to have been too long. So I think one got loose. But didn’t find enough for it to be 2 complete threads So basically, I am not sure what happened!
Got from winding the warp to sleighing the reed. Didn’t tie onto the beam as it was midnight & wanted to double-check that I sleighed the reed. It was short by about a 1/2”. So figured it was wiser to do that with a clear head tomorrow.
Sunday 1-20-2019
Glad I waited to tie onto the front apron rod! Had to rethread the reed 3-4 times. I realized I skipped a dent. Then I realized I skipped 4 threads in a bout that was were still with the heddles! Whoops!!
Had a couple more hiccups. But finally got it done & double checked. Now it was almost 18” in the reed as the draft says it should be. Minus the 2 missing red threads, it was where it should be.
I am grateful the project has a sampling section built into it
Within 4 picks, I discovered something was wrong. I had 2 threads in the reed backwards! Thankfully, I saw it early in the sample & was able to fix it.
FINALLY got to start weaving!
Got 1/2 the first pillow woven! Hooray! Though it helps that half of that is plain weave which requires not thought!
Monday 1-21-2019
Weaving is always faster than warping! First pillow done! Folllowing the class project.
Friday 1-25-2019
Pillow 2 done! Whoohoo. Love how fast it comes together.
Spent a good deal of the evening playing with patterns to figure out what I wanted to do for Pillow 3!
Pillow 3 - Saturday 1-26-2019 & Sunday 1-27-2019
I started weaving on Saturday & finished Sunday.
Decided to keep similar size of the blocks of color from pillow 2 for pillow 3.
For section 1 of the 3rd pillow, I decided to weave Draft 16 of the course materials. Got 2 repeats in and hated it. So I went back & started over. Realized I hadn’t done any basket weave. Wanted to give it a try. Definitely like result.
Section 2 is Draft 18 - 3/4, 2/4, 1/2, 2/4. I don’t think the pattern is as clear in the weaving as it is in the pattern. But curious to see if the fulling change it for good or ill.
Section 3 is Draft 19 - 3/4, 1/3, 2/4, 1/2, 2/4, 1/2. Really like the look of it. Think I would like to try that with a tight structure yarn.
The first three all used the same tie up as pillow 2. I had to change the tie up for the second section.
I did:
1-3
1
2
3
4
2-4
I have read that is a good tie up. Though Madelyn van der Hoogt has a piece about switching 2 & 3. I am sure there are good reasons. But I just can’t get my head around that yet. laugh
I thought I had everything on the guide tape for sections 4-6. But I think I may have flubber up & switched some! But I think these are the structures.
Section 4 is Draft 34 - 2, 1/3, 2, 4, 1/3, 4
Section 5 is Draft 26 - 3/4, 4, 1, 1/2
Section 6 is Draft 22 - 3, 2/4, 1, 2/4
Definitely more textured than pillow 2. A bit more dense overall. Happy with that.
Pre & Post Finishing Measurements
Width in loom was supposed to be 18”. But I definitely had more draw in than that.
The measuring tape was 36”. Definitely didn’t keep that off the loom.
Pre-Finishing
Starting Sample
16” for most but 17” for starting tabby
8” long
Pillow 1:
17” wide at tabby
15.5” with twill
33” long
Pillow 2:
15.5” wide
34 1/4” long
Pillow 3:
15”-15.5” wide for most but last is 16”
32 3/4” long
End Basketweave Sample
16” wide
9” long
Post-Finishing
Starting Sample
16” for most but 17” for starting tabby
7” long
Pillow 1:
16.5” wide at tabby
15.25” with twill
31” long
Pillow 2:
15” wide
31 1/2” long
Pillow 3:
15” wide for most but middle section 14.75” & last is 15.25”
31” long
End Basketweave Sample
15.25” wide
8” long
Waiting to Mark Finished - 1/27
Still waiting to mark as finished. Need to get the pillows & sew the pieces until I will count this as complete.
Weaving & finishing done 1/27. Of course, the sewing isn’t yet…
DONE!! MARCH 17TH!!
So…yeah. They sat for nearly two months before I sewed them. Being fair, I didn’t order the pillows for almost a month after finishing. So I can totally use that as an excuse.
LOVE THEM! I want to make dozens more. And totally get why people go into weaving. I want to weave way more than I can use!